SG 20 kW Silent Diesel Generator
Three-phase silent diesel generator set with a Weichai WP2.3D25E200 engine, brushless alternator and SmartGen 6110 auto mains failure controller in an enclosed canopy.
- Rated output
- 20 kW / 25 kVA
- Three-phase output
- 400/230 V · 50 Hz
- Engine model
- Weichai WP2.3D25E200
- Weight
- 550 kg
Overview
The SG 20 kW silent diesel generator pairs a Weichai WP2.3D25E200 4-cylinder water-cooled diesel engine (2.3 L, 23 / 25 kW) with a brushless, self-excited alternator with AVR and class H insulation. It is rated 20 kW / 25 kVA at 400/230 V, three-phase four-wire, 50 Hz, power factor 0.8 and rated current 36 A.
A SmartGen 6110 controller with auto mains failure (AMF) function monitors mains and generator values, signals a changeover switch panel and shuts the set down on faults; the engine starts electrically at 12 V DC. The set sits in an enclosed canopy on a steel base frame with anti-vibration pads and an integral 60 L fuel tank, and measures 1500 × 870 × 1200 mm with a dry weight of 550 kg. The photographs show the white canopy used across the 15–30 kW range; canopy colour is confirmed in the order.
Specifications
Specifications for the SG 20 kW Silent Diesel Generator from the set specification sheet.
| Specification | SG 20 kW Silent Diesel Generator |
|---|---|
| Product type | Silent-type diesel generator set in an enclosed canopy |
| Rated output | 20 kW / 25 kVA |
| Rated voltage | 400/230 V |
| Phase and wiring | Three-phase, four-wire |
| Rated current | 36 A |
| Frequency | 50 Hz |
| Power factor | 0.8 lagging |
| Engine model | Weichai WP2.3D25E200 |
| Engine power | 23 / 25 kW |
| Engine type | 4-cylinder, water-cooled, direct injection |
| Displacement | 2.3 L |
| Bore × stroke | 90 × 100 mm |
| Compression ratio | 17.5:1 |
| Starting system | 12 V DC electric start |
| Fuel consumption at 100% load | < 200 g/kWh |
| Fuel consumption at 50% load | < 205 g/kWh |
| Lubricating oil capacity | 13 L |
| Coolant capacity | 28 L |
| Alternator | Brushless, self-excited, with AVR |
| Insulation class | H |
| Steady-state voltage regulation | ≤ ±1% |
| Steady-state frequency regulation | ≤ 5% |
| Controller | SmartGen 6110 with auto mains failure (AMF) function |
| Shutdown protections | Low oil pressure, high engine temperature, over/under speed, fail to start, over/under voltage, over current, over/under frequency, charge fail, emergency stop |
| Dimensions (L × W × H) | 1500 × 870 × 1200 mm |
| Weight (dry) | 550 kg |
| Fuel tank | 60 L, integral in the base frame |
| Rated site altitude | ≤ 1000 m |
| Standard supply | Radiator with fan, insulated exhaust silencer, maintenance-free battery with rack and cables, static battery charger, exterior emergency stop button, anti-vibration pads, fuel level sensor, replaceable fuel, oil and air filters, manual sump drain valve |
Values are taken from the SG 20 kW Silent Diesel Generator product documents.
Fuel-consumption and runtime figures are values listed in the model source. Request the load point, fuel or tank basis and test conditions for a like-for-like comparison; actual consumption and operating time depend on the operating conditions.
Compare models
SG 20 kW Silent Diesel Generator vs SG 15 kW Silent Diesel Generator vs SG 25 kW Silent Diesel Generator
Key differences from the published specifications. See the full specifications above and on each model page; the order configuration is confirmed in your quotation.
| Specification | SG 20 kW Silent Diesel Generator | SG 15 kW Silent Diesel Generator | SG 25 kW Silent Diesel Generator |
|---|---|---|---|
| Rated output | 20 kW / 25 kVA | 15 kW / 18.75 kVA | 25 kW / 31 kVA |
Questions about SG 20 kW Silent Diesel Generator
Short answers for comparing this configuration before quotation.
Send your requirementsWhat is the rated output of the SG 20 kW silent diesel generator?
The set is rated 20 kW / 25 kVA at 400/230 V, three-phase four-wire, 50 Hz, at power factor 0.8 with a rated current of 36 A.
Which engine does it use?
A Weichai WP2.3D25E200 4-cylinder water-cooled diesel engine: 2.3 L, bore × stroke 90 × 100 mm, engine power 23 / 25 kW, 12 V DC electric start. Fuel consumption is below 200 g/kWh at 100% load and below 205 g/kWh at 50% load.
How large and heavy is the set, and how big is the fuel tank?
The canopy set measures 1500 × 870 × 1200 mm and weighs 550 kg dry. The steel base frame carries an integral 60 L fuel tank with a level sensor connected to the controller.
Which controller and protections are included?
A SmartGen 6110 controller with auto mains failure (AMF) function: it monitors the mains, starts the set automatically, signals a changeover switch panel and records events. It shuts the set down for low oil pressure, high engine temperature, over/under speed, over/under voltage, over current, over/under frequency, fail to start and emergency stop.
What should I send for a quotation?
Send the destination country, voltage and frequency, the connected load with its starting demand, standby or continuous duty, site altitude and temperature, whether you need an automatic transfer switch, the canopy colour and the quantity.
Buyer guides for this model
Check power, configuration and documents before requesting a quotation
For an accurate quotation
Three details to confirm
- Electrical setupDestination market, voltage, frequency, phase and transfer-switch need
- Actual useConnected equipment, running load, starting demand and duty
- Order scopeQuantity, canopy colour, packaging, branding and required documents
