SG 440 kW Silent Diesel Generator
Three-phase silent diesel generator set with a Weichai WP13D490E310 engine, brushless alternator and SmartGen 6110 auto mains failure controller in an enclosed canopy.
- Rated output
- 440 kW / 550 kVA
- Three-phase output
- 400/230 V · 50 Hz
- Engine model
- Weichai WP13D490E310
- Weight
- 3600 kg
Overview
The SG 440 kW silent diesel generator pairs a Weichai WP13D490E310 6-cylinder water-cooled, turbocharged diesel engine (12.54 L, 450 / 490 kW) with a brushless, self-excited alternator with AVR and class H insulation. It is rated 440 kW / 550 kVA at 400/230 V, three-phase four-wire, 50 Hz, power factor 0.8 and rated current 792 A.
A SmartGen 6110 controller with auto mains failure (AMF) function monitors mains and generator values, signals a changeover switch panel and shuts the set down on faults; the engine starts electrically at 24 V DC. The set sits in an enclosed canopy on a steel base frame with anti-vibration pads and an integral 630 L fuel tank, and measures 3900 × 1650 × 2300 mm with a dry weight of 3600 kg. The photographs show the teal canopy used across the 320–500 kW range; canopy colour is confirmed in the order.
Specifications
Specifications for the SG 440 kW Silent Diesel Generator from the set specification sheet.
| Specification | SG 440 kW Silent Diesel Generator |
|---|---|
| Product type | Silent-type diesel generator set in an enclosed canopy |
| Rated output | 440 kW / 550 kVA |
| Rated voltage | 400/230 V |
| Phase and wiring | Three-phase, four-wire |
| Rated current | 792 A |
| Frequency | 50 Hz |
| Power factor | 0.8 lagging |
| Engine model | Weichai WP13D490E310 |
| Engine power | 450 / 490 kW |
| Engine type | 6-cylinder, water-cooled, turbocharged, direct injection |
| Displacement | 12.54 L |
| Bore × stroke | 127 × 165 mm |
| Compression ratio | 16:1 |
| Governor | Electronic |
| Starting system | 24 V DC electric start |
| Fuel consumption at 100% load | < 204 g/kWh |
| Fuel consumption at 50% load | < 204 g/kWh |
| Lubricating oil capacity | 36 L |
| Coolant capacity | 91 L |
| Alternator | Brushless, self-excited, with AVR |
| Insulation class | H |
| Steady-state voltage regulation | ≤ ±1% |
| Steady-state frequency regulation | ≤ 5% |
| Controller | SmartGen 6110 with auto mains failure (AMF) function |
| Shutdown protections | Low oil pressure, high engine temperature, over/under speed, fail to start, over/under voltage, over current, over/under frequency, charge fail, emergency stop |
| Dimensions (L × W × H) | 3900 × 1650 × 2300 mm |
| Weight (dry) | 3600 kg |
| Fuel tank | 630 L, integral in the base frame |
| Rated site altitude | ≤ 1000 m |
| Standard supply | Radiator with fan, insulated exhaust silencer, maintenance-free battery with rack and cables, static battery charger, exterior emergency stop button, anti-vibration pads, fuel level sensor, replaceable fuel, oil and air filters, manual sump drain valve |
Values are taken from the SG 440 kW Silent Diesel Generator product documents.
Fuel-consumption and runtime figures are values listed in the model source. Request the load point, fuel or tank basis and test conditions for a like-for-like comparison; actual consumption and operating time depend on the operating conditions.
Compare models
SG 440 kW Silent Diesel Generator vs SG 400 kW Silent Diesel Generator vs SG 500 kW Silent Diesel Generator (6M33D572E200)
Key differences from the published specifications. See the full specifications above and on each model page; the order configuration is confirmed in your quotation.
| Specification | SG 440 kW Silent Diesel Generator | SG 400 kW Silent Diesel Generator | SG 500 kW Silent Diesel Generator (6M33D572E200) |
|---|---|---|---|
| Rated output | 440 kW / 550 kVA | 400 kW / 500 kVA | 500 kW / 625 kVA |
| Fuel tank | 630 L, integral in the base frame | 630 L, integral in the base frame | 800 L, integral in the base frame |
| Displacement | 12.54 L | 12.54 L | 19.6 L |
Questions about SG 440 kW Silent Diesel Generator
Short answers for comparing this configuration before quotation.
Send your requirementsWhat is the rated output of the SG 440 kW silent diesel generator?
The set is rated 440 kW / 550 kVA at 400/230 V, three-phase four-wire, 50 Hz, at power factor 0.8 with a rated current of 792 A.
Which engine does it use?
A Weichai WP13D490E310 6-cylinder water-cooled, turbocharged diesel engine: 12.54 L, bore × stroke 127 × 165 mm, engine power 450 / 490 kW, electronic governor, 24 V DC electric start. Fuel consumption is below 204 g/kWh at 100% load and below 204 g/kWh at 50% load.
How large and heavy is the set, and how big is the fuel tank?
The canopy set measures 3900 × 1650 × 2300 mm and weighs 3600 kg dry. The steel base frame carries an integral 630 L fuel tank with a level sensor connected to the controller.
Which controller and protections are included?
A SmartGen 6110 controller with auto mains failure (AMF) function: it monitors the mains, starts the set automatically, signals a changeover switch panel and records events. It shuts the set down for low oil pressure, high engine temperature, over/under speed, over/under voltage, over current, over/under frequency, fail to start and emergency stop.
What should I send for a quotation?
Send the destination country, voltage and frequency, the connected load with its starting demand, standby or continuous duty, site altitude and temperature, whether you need an automatic transfer switch, the canopy colour and the quantity.
Buyer guides for this model
Check power, configuration and documents before requesting a quotation
For an accurate quotation
Three details to confirm
- Electrical setupDestination market, voltage, frequency, phase and transfer-switch need
- Actual useConnected equipment, running load, starting demand and duty
- Order scopeQuantity, canopy colour, packaging, branding and required documents
